Average: 0
Rating Count: 0
You Rated: Not rated

Please log in to rate.

specifications

Manufacturer:

Rainier Arms, LLC

Caliber:

.308 / 7.62

Gas System Length:

Intermediate

Barrel Length:

18"

Finish:

Polished

    Rainier Arms Ultramatch Mod2 .308 Dpms Gen 2 Spec .800 Gas Block- 18 Polished

    Caliber Manufacturer Color Weight Merchant Price Merchant URL
    .308 / 7.62 Rainier Arms, Llc None None None $ 589.95 RainierArms Add
    .308 / 7.62 Rainier Arms, Llc None None None $ 589.95 RainierArms Add
    .308 / 7.62 Rainier Arms, Llc None None None $ 589.95 RainierArms Add
    .308 / 7.62 Rainier Arms, Llc None None None $ 589.95 RainierArms Add
    .308 / 7.62 Rainier Arms, Llc None None None $ 589.95 RainierArms Add

    **Fits Gen2 DPMS short frame guns
    Standard Gas Block & Gas tube Included
    RA Adjustable Gas Block Upgrade for $59.99
    Introducing our MOD2 UltraMatch barrel using the finest blank. Our goal is to mass produce them to bring them to market at the most competitive prices. We wanted the best balance between accuracy while keeping the weight down as much as possible. We are so confident in our UltraMatch barrels that we will offer a 100% money back guarantee within 90 days of purchase. If you aren't completely satisfied with the barrel for any reason, return it for a full refund, no questions asked.
    Features:

    Stainless Steel Match Grade Blank
    NiB Extension
    Length: 18"
    Twist: 1:10
    Thread Pitch: 5/8 X 24
    .800 Gas Block Seat
    .308 Rainier Match Chamber
    Intermediate Gas System
    4 Groove
    M4 Feed Ramps
    Proprietary Contour
    Bead Blasted Finish
    Weight: 2 lbs 6.6 oz

    Rainier Arms Low Profile Gas Block:

    416 SS
    Finish: Melonite
    Ultra Low Profile.
    Weight 1.7 oz
    Made in the USA

     
    Adjustable Gas Block:
    Bleed Off”, direct impingement, gas block for the AR15 platform adjusts the gas flow by bleeding the gas out of the block instead of restricting the flow like conventional adjustable blocks.  Results:

    The pressure used in the block is reduced only to the amount required to drive the bolt carrier. The remaining gas / pressure are bled out of the block allowing the system to run much cleaner and cooler. 
    Reduction of felt recoil.
    Patent pending adjustment detent is located outside of the block and therefore no contamination.
    The gas adjustment screw does not restrict the gas flow; therefore there is no erosion or seizing of the screw / no loss of detent due to carbon build up.  Although it is removable, we have added a safety mechanism, which stops you from unintentionally backing the screw all the way out.
    When using SBR’s and / or suppressors the bleed off port allows the excessive pressure to be exhausted out of the block reducing blow back. 

     
    Spec:

    Gas Block Material: 416 SS
    Finish: Melonite or Matt Stainless
    Barrel Diameter:0.625" -0.875"-0.750" - 0.936"
    Weight:  1.80 oz
    Length: 1.00"
    Attachment Type: Solid
    Gas Adjustment:  (Patent Pending) 30 Locked Positions, Front Of Block 
    Bleed Off Port:  (Patent Pending) Front Of Block

    Included:

    Gas Block - Assembled
    (2) 10-32 x 3/16" Socket Head Cap Screws
    (1) Gas Tube Roll Pins
    (1) 3/32 X 6" L-Shaped Hex Keys

    Comments