specifications
Manufacturer:
EraThr3
Platform:AR-15
Erathr3 Ar-15 M-Lok Handguard
Caliber | Manufacturer | Color | Weight | Merchant Price | Merchant URL | |
---|---|---|---|---|---|---|
None | Erathr3 | None | None None | $ 269.00 | RainierArms | Add |
The EraThr3 Low-Pro M-LOK Handguard is a sleek, free-floating alternative for the AR-15 weapon system. Designed with versatility in mind, M-LOK slots are positioned at 3, 6, & 9 o’clock positions, leaving the door wide open for hanging everything under the sun off of your rifle. Direct-mount M-LOK accessories and/or M-LOK 1913 Picatinny rail sections are easily installed for the mounting of tactical lights, slings, grips, and/or any other items one may deem necessary.
M-LOK is a modular locking accessory mounting system that is a direct attachment method for hard mounting accessories to a negative space mounting point. Designed by Magpul Industries as an evolution of the MOE slot system used since 2007, the M-LOK system is being released as a free licensed platform to allow greater compatibility of accessories between all manufactures.
Specifications:
6061 Hardcoat Anodized Aluminum
Black Cerakote Finish
Steel Barrel Nut w/ Torx Fasteners
M-LOK Accessory Slots
E3H1-10:
Length: 10.5”
Weight: .50 lbs
E3H1-12:
Length: 12”
Weight: .55 lbs
E3H1-14:
Length: 13.5”
Weight: .60 lbs
Recommended Tools & Shop Supplies:
Gun Vise and Upper Receiver Block
1 11/16” End Wrench
Torque Wrench & Driver Set
Anti-Seize & Gun Oil Blue Loctite or Equivalent
Common Sense The EraThr3 handguard is a “low-profile” design, and generally requires the use of “7mm” M-LOK accessory screws, to avoid interference with the barrel and/or gas block. The “M-LOK T-Nut Replacement Set”, Magpul Part #MAG615, can be purchased through your local Magpul dealer. For installation instructions of Magpul accessories, please visit www.Magpul.com, or consult with a qualified gunsmith.
Warning: Regardless of your experience and/or self proclaimed level of expertise, the E3 handguard should always be installed by a "qualified gunsmith”, with a proper understanding of the weapon platform. The E3 hanguard was developed to be compatible with Mil-spec, direct impingement AR-15 systems. Do not attempt to alter, change, or use a big hammer to make it fit something else. We know you’re smarter than that, however our scary legal team doesn’t believe you. Firearms can be harmful, and/or fatal if not handled properly. EraTh3, LLC shall not be liable for any damage, injury, or death due to faulty installation, or irresponsible practice.
Comments
Please log in to leave a comment