JP Enterprises LARGE FRAME LMOS Bolt Carrier Group w/ High Pressure .308 Bolt

Complete bolt carrier assembly with JPBC-4 stainless .308 Low Mass Carrier and JPEB-308HP JP High Pressure EnhancedBolt™, cam pin, firing pin and firing pin retainer. WARNING: The JP .308HP bolt does not allow for the use of excessive pressure, overloaded ammunition that exceeds SAAMI specifications. When evaluating new ammunition, always start on the low- to mid-range of any published load data and work up. A good indicator of working pressure is the primer retention on the subsequent loading of a case. A noticeable loss of primer pocket tension indicates that your ammunition has excessive pressure and has overworked the case.
Package Includes:

JP bolt carrier
JP EnhancedBolt (.308)
Cam pin
Firing pin
Firing pin retainer pin

 

Compatibility
This notice pertains to any rifle based on the large-format AR-10-type or LR-308 platform typically chambered in .308 Winchester, 7.62x51 NATO or other cartridges requiring the longer magazine format.
Be aware that these receiver platforms are not standardized like the AR-15/M16 platform for which most parts are cross-compatible. Before ordering accessories and parts for your large-format rifle, make sure the parts are compatible with your particular platform. This bolt carrier group is compatible only with the DPMS family of AR-10 products.
With the Armalite/Rock River family of large-frame receivers, this carrier can only be used as a complete bolt carrier assembly group with a DPMS-pattern bolt such as our .308 JP EnhancedBolt. Interchanging individual components will result in an unsafe configuration. Do not under any circumstances mix and match components between the platforms.