Aimpoint PRO 12841

A hard-anodized 30mm tube was utilized, enclosing a high efficiency circuit that allows the sight to be turned on and left on for up to three years using a single battery.The front lens utilizes a unique band-pass coating, which allows the sight to be used with all generations of night vision devices. The modular QRP2 mount includes a removable spacer that indexes the sight at the optimal height for co-witness with the standard iron sights on AR15/M16/M4 Carbine style weapons. This spacer can be removed to enable the use of the sight on police shotguns or sub-machineguns. The QRP2 mount also incorporates a torque-limiting twist knob that provides the optimal level of pressure on the rail while completely eliminating the possibility of over-tightening. Both the front and rear lenses are recessed within the sight body to provide protection against impact damage, scratches, and fingerprints.Flip covers are included to further protect the lenses, and a transparent rear lens cover is utilized allowing the user to engage a target with the lens covers closed in an emergency situation. A two Minute of Angle (2 MOA) red dot is utilized to allow maximum accuracy at all distances and under all environmental conditions.GENERAL DATAArticle number12841TechnologyACET (Advanced Circuit Efficiency Technology)Working principleReflex collimator sight - red dot sightOPTICAL DATALightsourceLED (Light Emitting Diode) totally eye-safeLightsource wavelength650 nm red lightRed dot size in MOA (minute of angle)*2ParallaxAbsence of parallax -No centering requiredEye reliefUnlimitedNight vision compatibilityYesAnti-reflex coating all surfaces & multi-layer coating objective lensYesMagnificationNo magnification (1X)ELECTRONIC DATABatteryOne 3V Lithium battery, type 2L76 or DL1/3NBattery life in hours **30 000 (over 3 years of continuous use)Dot intensity adjustmentManual rotary switchDaylight (DL) settings6 DL of which one extra brightNVD settings4 NVDMECHANICAL DATAMaterial housingHigh strength aluminumSurface finishHard anodized, matteColor housingBlackAdjustment 1 click13mm at 100m, (1/2” at 100yds)Mounting methodsQRP2 mount for M1913 atandard Picatinny rail, and spacer for AR15/M4 carbine applicationENVIROMENTAL DATATemperature range(-45° - +71° C), (-50° - +160° F)Water resistance - submersible to45m, (150ft)Radioactive components usedNoneDIMENSIONSLength130mm, (5.1”)Width/height sight only55 x 55mm, (2.2” x 2.2”)Maximum ring width30mm, (1.18”)Objective diameter38mm, (1.5”)Tube diameter30mm, (1.18”)Weight sight only220g, (7.8oz)****Weight sight with integrated mount11.6 oz including mount and spacer* 1 MOA ˜ 30 mm at 100 meters ˜ 1” at 100 yards.** at room temperature & at setting 7 out of 10.Specifications are subject to change without notice.